-
Shopping Basket
Antifouling

Antifouling

A fouled hull slows you down, burns more fuel and costs you a weekend with a scraper. Aqua Marine Antifouling GP 1.25 is designed to stop weed and barnacle fouling for a full season, so your time goes on the water, not under the boat.

Made in the UK, this general-purpose antifoul suits all boats up to 25 knots (not aluminium). It goes on by brush or roller, covers 10 m² per litre, and allows up to 3 months between painting and launch (if covered), so you can paint when the weather is right. Available in Red, Blue and Black, with Metaclor primer and Thinners 17 to complete the job.

Paint once. Protected all season.

Use antifouling products safely. Always read the label and product information before use. Contains dicopper oxide.

Next Day Delivery

from £3.49

Filter by:
Price Range toggle
£0 £1010
Filter by:
Price Range toggle
£0 £1010

No products found matching your criteria.

People are asking us

Aqua Marine Antifouling GP 1.25 is a general-purpose, one-season antifoul for all boats up to 25 knots. With the right primer it can go on GRP, wood and steel hulls. It must not be used on aluminium boats. Not sure? Call us on +44 1543 279138 and we’ll help you choose.

Each litre covers about 10 m² per coat, and you need two coats. As a guide, a 9m (30ft) fin-keel yacht needs about 5 litres (2 × 2.5L tins) and a 9m motorboat about 8 litres (4 tins). See our antifoul quantity chart for your boat.

At least two full coats, plus a third on high-wear areas such as the waterline, bow and leading edges of the keel and rudder. Don’t spread it thinner than 10 m² per litre, or it can wear through before the end of the season.

On bare surfaces, yes. Bare GRP should be lightly abraded with 120-grit paper and given at least 2 coats of Metaclor Antifouling Primer. Bare metal and wood need at least 2 coats (no more than 3). Leave the primer at least 8 hours before antifouling. You don’t usually need primer over sound, compatible antifoul.

Usually, yes, if the old coating is sound. Wash it, lightly wet-sand it and test a small patch first. If it’s flaking or you don’t know what it is, read our guide to antifouling over old antifoul.

Leave at least 18 hours at 20°C between coats and at least 8 hours after the final coat before launch. You can leave up to 3 months between painting and launch if the boat is kept covered. Everything takes longer in cold, damp weather. See when to antifoul your boat.

Stir well, then apply by brush or roller. Spraying is for professional operators only. Our step-by-step antifouling guide takes you through preparation, priming, coats and relaunch.

Clean brushes and trays with Teamac Thinners 17. Empty tins, rollers, tape, gloves and scrapings are hazardous waste – take them to your marina’s hazardous waste point or local recycling centre. Never dry sand or burn off old antifoul.

Red, Blue and Black. Colours may look slightly different on your screen.

Your Basket

0 items
Product
Total